NETGEAR M5300: To load new code using USB by boot menu
Views - 1100  |  0 people found this helpful KBA-453

NETGEAR - Switches  

To load new operational code using a USB from the boot menu on the M5300:

  1. From the boot menu, select option 3 and press enter.
  2. When prompted, enter the file name of the stk image for the firmware and press enter.
  3. When prompted, enter either 1 or 2 to select the image that you want to save the new firmware to.
  4. Enter 15 to reboot the switch.

    Published on: 8/23/2016 3:01:24 PM   |  Last updated: 9/20/2017 12:04:25 PM  

Similar Articles

Share this article



Winco (Pacific) Limited      Phone: 2803-0036   Email: