How to replace a fan on NETGEAR ReadyNAS 4360?
Views - 1040  |  0 people found this helpful KBA-647

NETGEAR - Storage  

To replace a fan on a ReadyNAS 4360 storage system:

1. Remove the chassis cover.
2. Pull up on the fan gently to remove it from the housing.

3. Insert the replacement fan into the housing.
4. Make sure that the four bumpers fit in their grooves.
5. Push the fan down to seat the fan and the fan power connections.
    If the system power is on, the hot-plug feature causes the fan to start immediately.



    Published on: 8/4/2017 10:55:45 AM   |  Last updated: 8/4/2017 10:55:45 AM  

Similar Articles

Share this article



Winco (Pacific) Limited      Phone: 2803-0036   Email: