How do i reset my Orbi system to factory default settings
Views - 1689  |  1 people found this helpful KBA-489

NETGEAR - Orbi  

Resetting to factory settings will erase personalized settings such as login credentials, SSID/network name and password settings. You will be required to walk through the initial setup again after resetting to factory settings.

There are two ways to reset your Orbi system to factory default settings:


I. Reset via reset button on your Orbi router/satellite.

  1. Make sure router/satellite units are powered on. Locate the tiny reset pin hole on the back of the unit.

  1. Using a paper clip or similar object, press and hold the reset pin hole until the power LED blinks amber.
  2. Wait for a minute and make sure that the power is solid green. If not, please press the power on/off twice until the power illuminates solid green.


II. Reset via the Orbi GUI:

  1. Connect your device to Orbi network.
  2. Launch a web browser and visit http://orbilogin.com to log in.
    A login window opens.
  3. Enter admin user name and password.
    The BASIC Home page displays.
  4. Select ADVANCED>Administration> Backup Settings then hit ERASE button.

  1. Wait for a minute and make sure that the power is solid green. If not, please press the power on/off twice until the power illuminates solid green.

 

 

    Published on: 12/9/2016 4:14:06 PM   |  Last updated: 1/16/2017 11:23:48 AM  
 
 

Similar Articles

Share this article

 

Tags


Winco (Pacific) Limited      Phone: 2803-0036   Email: support@winco.com.hk