How do I manually enter a static IP address for my Orbi router?
Views - 1471  |  0 people found this helpful KBA-570

NETGEAR - Orbi  

When a router is connected to DSL or to a cable modem, the router usually gets an IP address from the Internet service provider (ISP). However, some ISPs require you to manually enter a static IP address to connect to the Internet.

To manually enter a static IP address:

  1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
  2. Enter
    A login window appears.
  3. Enter the router user name and password.
    The user name is admin. The default password is password. The user name and password are case sensitive.
    The BASIC Home page displays.
  4. Select Internet.
  5. Under Internet IP Address, select Use Static IP Address.
  6. Complete the IP AddressIP Subnet Mask, and Gateway IP Address fields.
    Note: Your ISP provides this information.
  7. Under Domain Name Server (DNS) Address, select Use These DNS Servers.
  8. Complete the Primary DNS and Secondary DNS fields.
    Note: Your ISP provides this information.
  9. Click Apply.
    Your settings are saved.

    Published on: 1/29/2017 1:17:13 PM   |  Last updated: 1/29/2017 1:17:13 PM  

Similar Articles

Share this article



Winco (Pacific) Limited      Phone: 2803-0036   Email: