How do I change the host name on my ReadyDATA storage system?
Views - 957  |  0 people found this helpful KBA-193

NETGEAR - Storage  

How do I change the host name on my ReadyDATA storage system?

The ReadyDATA uses a host name to advertise itself on the network. When you review the network using RAIDar, a computer, or any other interface, you can recognize the ReadyDATA by its host name.

The default host name is RES- followed by the last six bytes of the system's primary MAC address. You can change the host name to one that is easier to remember and recognize.

To change the host name:

1. Select System > Overview > Hardware.

The Dashboard home screen displays the system information:

2. Click the gear icon to the right of the Name field.

The New Hostname pop-up screen displays:

3. In the Name field, enter a new host name.

The host name can have a maximum of 14 characters in most non-Asian languages. If you use Asian language characters, the limit is lower.

4. Click Apply.

 

This article applies to the following ReadyDATA storage systems:

  • ReadyDATA 516
  • ReadyDATA 5200
 
 
Published 05/15/2013 03:32 PM   |   Updated 08/30/2013 07:00 AM
 

    Published on: 6/8/2015 6:19:09 PM   |  Last updated: 9/24/2015 1:49:14 PM  
 
 

Share this article

 

Winco (Pacific) Limited      Phone: 2803-0036   Email: support@winco.com.hk