NETGEAR APS550W (power modules) FAQs
點擊 - 1590  |  0 個人喜歡這篇文章和覺得有幫助 KBA-460

NETGEAR - Switches  


  1. What exactly is APS550W?
    The APS550W is the power module which is used on M4300-28G-PoE+ and M4300-52G-PoE+.
  2. How much PoE power can each APS550W provide?
    Each APS550W can provide up to 480W of total powers to the switch.
  3. Does APS550W support hot swap?
    No, before APS550W is installed into the M4300-28G-PoE+ or M4300-52G-PoE+ power module slot, be sure to disconnect the AC power cord from APS550W.
  4. Can APS550W be used in RPS4000?
    No, ASP550W cannot be used in RPS4000.
  5. Can APS550W be used in redundant mode with APS1000W?
    No, if both APS550W and APS1000W are plugged in M4300-52G-PoE+, only APS1000W provides power to M4300-52G-PoE+.
  6. Can APS550W be used as backup for APS1000W?
    Yes, if both APS550W and APS1000W are plugged in M4300-52G-PoE+, APS1000W provides power to M4300-52G-PoE+. Once APS1000W is failed, APS550W will provide the power to M4300-52G-PoE+. In this case, M4300-52G-PoE+ maybe reboot if the PoE load is more than the power which APS550W can provide.
  7. What is APS550W form factor?
    It is 1.64 x 3.6 x 8.65 in. (39.3 x 86.36 x 207.56 mm)
  8. What is the maximum ambient temperature APS550W allow?
    The operational temperature is 0 to 55ºC (32 to 131ºF).
 

    更新日期: 8/25/2016 10:05:01 AM  
 
 

類似的文章

Share this article

 

標籤


Winco (Pacific) Limited      Phone: 3619-8822   Email: [email protected]