You can configure your EX7000 a wireless range extender to boost the range of your existing wireless network.

To configure your EX7000 as a wireless range extender, follow the steps below:

1. Connect your computer to the EX7000 via wired or wireless connection.
   
   - Wired: Use an Ethernet cable to connect your computer to one of the available Ethernet ports of the EX7000.
   - Wireless: Use your WiFi network manager on your wireless computer or any WiFi device to connect to NETGEAR_EXT WiFi network.
2. Once connected, the Device to Extender LED   will turn to solid green.
3. Open your Internet browser such as Internet Explorer, Mozilla Firefox or Google Chrome.
4. Enter www.mywifiext.net in the address bar of your Internet browser.
5. Click on NEW EXTENDER SETUP button.
   
6. Complete the Extender Setup screen and click on NEXT.
   
   Note: This account is for your EX7000’s GUI username and password and for password recovery.
7. Select WiFi Range Extender.
   
8. Select your WiFi network that you wish to extend and click on Next. 
9. Enter your network key or passphrase and click on Next. 
   
10. You can change the SSID and passphrase of your Wi-Fi Range Extender or just use the same existing network password. Click on Next to save the settings.
    
11. After saving the settings, connect your wireless devices to the EX7000’s SSID before clicking on Continue.
12. The extender is now successfully connected to your existing WiFi network. Click on Next to proceed.
    
13. Fill out the product registration form to have access to product support, software update notifications and information on new products. After accomplishing the form, click on Finish.
    
    Note: If your device is already registered or if you wish to do it later, you can click on Skip Registration.
    

Your EX7000 is now properly configured as a WiFi range extender. You can also use its Ethernet ports to connect your wired devices such as gaming consoles, Smart TV or desktop computers.